When the temperature in your home is out of your control, you may need to replace your thermostat.
Changing a thermostat can seem like a daunting task, but it doesnt have to be.
In this article, well walk you through the steps of how to replace a broken thermostat in just three easy steps.
Well cover the preparation and tools needed, dismounting the old thermostat, and installing the new one.
With our help, youll be able to have your thermostat up and running in no time.
So, lets get started!.
Table of Contents
Short Answer
Replacing a broken thermostat can be a straightforward process.
First, make sure to turn off the power to the thermostat and disconnect the wires.
Next, remove the old thermostat and install the new one, following the instructions included with the thermostat.
Finally, reconnect the wires to the new thermostat and turn the power back on.
Make sure to test the new thermostat to ensure it is working correctly.
Preparation
When it comes to replacing a broken thermostat, preparation is key.
Before beginning the process, it is important to make sure that you have all of the necessary tools and materials.
First, you will need a screwdriver, wire cutters, and an electrical tester.
Additionally, you will need to purchase a new thermostat that is compatible with your system.
Once you have all of the necessary supplies, it is time to begin the process of replacing the thermostat.
The first step is to turn off the power to the thermostat.
Your homes main circuit breaker will likely have a switch that you can use to shut off all power to the thermostat.
If not, you will need to locate the fuse or breaker box specifically for the thermostat.
Once the power is off, it is time to remove the old thermostat from the wall.
The wires connecting the thermostat to the heating and cooling system should be disconnected before the thermostat is removed.
To do this, you will need to use a screwdriver to unscrew the mounting plate.
Once the plate is removed, the wires should be easy to access.
Cut the wires and set aside the old thermostat.
Now that you have the old thermostat removed, it is time to install the new one.
Make sure to follow the manufacturers instructions for installing the new thermostat.
Once the thermostat is installed, you will need to reattach the wires.
Finally, reattach the mounting plate to the wall and turn the power back on.
With the right preparation and a bit of patience, you can replace a broken thermostat in no time.
Step 1
Replacing a broken thermostat is a task that can easily be done with the right tools and a little bit of know-how.
The very first step is to turn off the power to the thermostat.
This can be done by either turning off the breaker that powers the thermostat at the main electrical panel, or by unplugging the power cord from its electrical outlet.
Once the power is turned off, you can begin to remove the old thermostat from the wall.
This is done by carefully disconnecting the wires and unscrewing the mounting plate.
Make sure to make note of the wire labels, their colors, and the location on the thermostat they are connected to so you can easily reconnect them to the new thermostat later.
Step 2
Once the power to the thermostat has been turned off, the next step is to remove the old thermostat from the wall.
This can be done by carefully unscrewing the mounting plate that holds the thermostat in place.
Before doing so, its important to take note of the wires that lead to the thermostat, as they will need to be connected to the new thermostat.
If possible, its a good idea to take a picture of the wiring configuration before disconnecting the wires, as this will make it easier to know how to reconnect them when the new thermostat is installed.
Once the wires have been disconnected and the mounting plate removed, the old thermostat can be removed from the wall.
Step 3
The final step to replacing a broken thermostat is to attach the mounting plate back to the wall and turn the power back on.
Start by carefully aligning the mounting plate over the hole in the wall and then use your screwdriver to screw it back in place.
Once the mounting plate is firmly in place, you can turn the power back on at the circuit breaker.
Make sure the new thermostat is in the off position before turning the power back on.
When the power is back on, you can test the new thermostat by setting the desired temperature.
If the temperature is not changing, make sure the wires are properly connected and that the batteries are installed correctly.
Once everything is working as it should, you can sit back and enjoy the full functionality of your new thermostat.
Replacing a broken thermostat is no small feat, but with the right tools and a little bit of patience, you can do it in no time.
With the right know-how and the right steps, you can easily replace a broken thermostat and be back up and running in no time.
Step 4
Once all of the necessary components have been gathered and the wiring has been disconnected from the old thermostat, the fourth step is to install the new thermostat.
This should be done per the manufacturers instructions, as the exact installation process may vary based on the brand and model of thermostat.
This step requires a steady hand and attention to detail, as the connections must be made correctly and securely.
To ensure that everything is installed correctly, it can be helpful to refer to the wiring diagram in the installation manual.
Once the thermostat is wired correctly, it is time to reattach the wires to the wall.
This should be done carefully, ensuring that each wire is connected to the appropriate terminal.
Once the wires are securely attached, the mounting plate can be reattached to the wall.
Finally, turn the power back on and test the new thermostat to make sure it is working properly.
With careful attention to detail and a little bit of know-how, replacing a broken thermostat can be a simple and straightforward process.
Step 5
The fifth and final step in replacing a broken thermostat is to attach the mounting plate back to the wall and turn the power back on.
Depending on the type of thermostat you are replacing, the mounting plate may need to be secured in place with screws or adhesive.
If youre using screws, make sure theyre tightened securely so the thermostat wont move or become loose.
Once the mounting plate is secured, you can turn the power back on and test the new thermostat to make sure its working correctly.
If everything checks out, youve successfully replaced your broken thermostat and can now enjoy the convenience of having a functioning thermostat again!.
Step 6
The final step in replacing your broken thermostat is to attach the mounting plate back to the wall and turn the power back on.
To do this, you will need a few items: a screwdriver, a level, and some mounting screws.
Start by lining up the mounting plate to the wall and marking the holes for the mounting screws.
Once you have marked the holes, use a level to make sure the plate is straight and even.
Next, use the screwdriver to screw the mounting screws into the wall, securing the plate in place.
Finally, turn the power back on to the thermostat and you’re done! With the right tools and a little bit of patience, you can replace a broken thermostat in no time.
Final Thoughts
Replacing a broken thermostat may seem like a difficult job, but with the right tools and a few simple steps, you can do it yourself with ease.
Armed with the knowledge of how to replace a broken thermostat, you are now ready to tackle the task.
So grab your tools and get to work – you’ll be feeling the cool air of a working thermostat in no time!.