How to Replace iRobot Roomba Side Brush: A Step-by-Step Guide to Get Your Robot Vacuum Back in Action


How to Replace iRobot Roomba Side Brush: A Step-by-Step Guide to Get Your Robot Vacuum Back in Action

Replacing the iRobot Roomba side brush is a relatively simple process. First, locate the brush by looking for the small plastic cover on the side of your Roomba. To remove the old brush, gently pull it out from under the cover and discard it. Then, insert the new brush into the cover and push it all the way in until it clicks into place.


As a proud owner of an iRobot Roomba, I’ve experienced firsthand the frustration that comes with a malfunctioning side brush.

The once-loyal companion to my robot vacuum now lies limp and useless, collecting dust bunnies and hair ties in its wake.

But fear not, fellow Roomba enthusiasts!

Today, we’re going to take control of our cleaning destinies and learn how to replace the iRobot Roomba side brush like a pro.

With this step-by-step guide, you’ll be back to vacuuming with ease in no time – and I’m excited to share my expertise with you.

Preparation is Key

Ahah, you’re about to embark on a thrilling adventure – replacing your iRobot Roomba’s side brush!

But before we dive into the nitty-gritty of the process, let’s get our ducks in a row (or should I say, our robots in alignment?).

Proper preparation is key to a smooth and successful replacement.

Check the Current Condition

Before you start rummaging for new parts, take a closer look at your Roomba’s side brush.

Is it worn out?

Damaged?

Or maybe it’s just doing its job, but not as efficiently as it used to?

Take note of any signs of wear or damage – this will help you determine what kind of replacement part you’ll need.

Gather Your Tools and Replacement Parts

Time to get your DIY on!

Make sure you have the following:

  • The new side brush (obviously!)
  • A trusty screwdriver (flathead or Phillips, depending on your Roomba model)
  • Any other necessary tools or parts specific to your robot vacuum’s design

Cleaning Up Before the Replacement

Before we start swapping out the side brush, let’s make sure our brushes are squeaky clean!

Take some time to tidy up any debris that might be clogging up the works.

This will ensure a smooth and efficient replacement process – and prevent any potential issues down the line.

Step-by-Step Replacement Guide: How to Breathe New Life into Your iRobot Roomba Side Brush

I’m sure you’re here because your trusty Roomba side brush has gone AWOL, leaving you wondering how to get your robot vacuum back in the game.

Don’t worry; I’ve got you covered!

In this step-by-step guide, I’ll walk you through a simple yet effective process to replace that pesky side brush and have your Roomba purring like new.

Step 1: Say Goodbye to the Old Side Brush

To begin, locate the old side brush and twist it counterclockwise.

Yes, you read that right – counterclockwise!

This might take a bit of force, so be gentle yet firm.

As you twist, keep an eye out for any debris or dirt stuck in the brush housing.

You can use a soft cloth or your finger to gently sweep away any remaining particles.

Step 2: Give That Brush Housing Some TLC

Now that the old side brush is out of the way, take a closer look at the brush housing.

I know it’s easy to overlook this step, but trust me, a quick clean can make all the difference in your Roomba’s performance.

Use a soft-bristled brush or a dry cloth to wipe away any remaining debris, dust, or dirt that might be hindering the new side brush’s movement.

Step 3: Welcome the New Side Brush!

Time to introduce the star of the show – your brand-new side brush!

Take it and twist it clockwise until it’s securely seated in place.

Make sure it’s properly aligned with the robot vacuum’s mechanism, as any misalignment can cause issues down the line.

The Final Check

Before you declare victory, take a moment to double-check that the new side brush is snugly fitted and correctly aligned.

A quick visual inspection should suffice – just make sure everything looks shipshape!

That’s it!

You’ve successfully replaced your iRobot Roomba side brush.

Pat yourself on the back; you’ve done an awesome job!

Now, go forth and conquer those floors like never before!

Troubleshooting Common Issues

Hey there, fellow iRobot Roomba enthusiasts!

Have you recently replaced your trusty side brush with a shiny new one, only to find that it doesn’t quite fit or seems loose?

Or perhaps you’re struggling to get the perfect brush height for optimal performance?

Well, you’re in luck because today we’re going to tackle these common issues and more.

We’ll dive into the world of troubleshooting and share some valuable tips to help you keep your robot vacuum running like a well-oiled machine.

The New Side Brush Doesn’t Fit (Or Seems Loose)

So, you’ve got your brand-new side brush in hand, but it doesn’t seem to be fitting quite right.

Or maybe it’s loose and threatening to come flying off at any moment.

Don’t worry, my friend; we’ve all been there.

First things first, let’s take a deep breath and assess the situation.

Check if the new side brush is indeed the correct one for your Roomba model (it’s easy to get confused with all the different models out there!).

If it’s the right one, then it might be that the old side brush was stuck or jammed in some way.

To fix this issue, try gently twisting and turning the new side brush while it’s still attached to the Roomba.

This should help loosen any stuck bits and get everything moving smoothly again.

If that doesn’t work, you can always try removing the old side brush and cleaning out any debris or hair that might be causing the problem.

Adjusting Brush Height for Optimal Performance

Now that we’ve got our new side brush fitted (or re-fitted), let’s talk about brush height.

You see, having the right brush height is crucial for optimal performance.

If it’s too high, your Roomba might struggle to get into tight spaces or pick up dirt effectively.

And if it’s too low, you might end up with a messy robot vacuum that’s leaving streaks and trails everywhere.

To adjust the brush height, simply lift the side brush off the floor and slide it back and forth along the slot until it feels just right.

You can also consult your Roomba’s user manual for specific instructions on how to do this.

Tips for Preventing Clogs and Maintaining the Side Brush

Finally, let’s talk about some tips for preventing clogs and maintaining that beautiful new side brush of yours.

Here are a few of my favorites:

  • Make sure to clean out any debris or hair from under your Roomba regularly (you can use a soft-bristled brush or even a vacuum cleaner). This will help keep the side brushes free-flowing and prevent any nasty clogs from forming.
  • Try using a robot vacuum cleaning schedule to keep your floors tidy. This way, you’ll be less likely to end up with a clogged side brush (or worse – a blocked Roomba!).
  • If you do encounter a clog or blockage, don’t panic! Simply turn off the Roomba and gently remove any debris that’s causing the problem.

And there you have it, folks!

With these troubleshooting tips under your belt, you should be well-equipped to handle any common issues that might arise with your new side brush.

Happy cleaning!

Final Thoughts

In this post, we’ve covered everything you need to know to replace your iRobot Roomba side brush like a pro.

From preparation and cleanup to step-by-step installation and troubleshooting tips, I hope you found this guide informative and helpful in getting your robot vacuum back up and running smoothly.

Replacing the side brush is a simple yet crucial maintenance task that can make all the difference in your cleaning experience.

By following these easy steps, you’ll be able to keep your Roomba performing at its best and avoid any potential issues or clogs.

So go ahead, take the plunge, and give your robot vacuum the TLC it deserves.

Happy cleaning!

James Lambert

Repairing and upgrading houses is a hobby that James Lambert is very dedicated to. Many of our more complex home improvement guides are written by him. His objective is to do repairs around the house in the most sensible and cheap manner possible.

Recent Posts