Are you looking for a step-by-step guide on how to reset your Arlo Pro 4 Camera? Resetting your device can be a daunting task, but it doesn’t have to be.
In this article, we’ll provide you with a comprehensive guide on how to reset your Arlo Pro 4 Camera in just a few easy steps.
We’ll cover the overview of the camera, understanding the reset button, and how to unplug the camera and its base station.
Plus, we’ll show you how to locate the reset button and press and hold it to complete the reset process.
Finally, we’ll walk you through the process of reconnecting the camera and base station.
Get ready to reset your Arlo Pro 4 Camera and get back to monitoring your home in no time!
Table of Contents
Short Answer
To reset an Arlo Pro 4 camera, hold the Sync button on the back of the camera for 10 seconds or until the LED light blinks amber.
Then let go of the Sync button and wait for the LED light to turn blue.
This indicates that the camera has been reset and is ready to be paired with the Arlo base station.
You can then go through the setup process in the Arlo app to complete the reset process.
Overview of the Arlo Pro 4 Camera
The Arlo Pro 4 Camera is the latest offering from Arlo, a leader in the home security camera market.
This powerful security camera offers an array of features designed to keep your home and family safe.
It is packed with advanced features to keep your home secure, including an HD camera, night vision, two-way audio, and motion detection.
The Arlo Pro 4 also includes a rechargeable battery, allowing it to be used wirelessly, without the need for a power outlet.
With its easy setup and simple operation, the Arlo Pro 4 is the perfect security camera for any home or business.
Understanding the Reset Button
When it comes to resetting your Arlo Pro 4 camera, its important to understand the reset button and how it works.
The reset button is a small, recessed button located on the back of the camera.
To reset the camera, you simply press and hold the reset button for 10 seconds.
This will cause the camera to reset and reboot itself.
After the reboot, the camera will need to be reconnected to your home WiFi network, and the base station will need to be reconnected to the camera.
Its important to note that the reset button is not the same as the reset switch on the base station.
The reset button on the camera is used to reset the camera itself, while the reset switch on the base station is used to reset the base station.
Resetting the base station will not reset the camera.
Additionally, the reset button on the camera should only be used if you need to reset the camera.
If you suspect that your camera is malfunctioning, contact Arlo customer support before attempting to reset the camera.
Step-by-Step Guide for Resetting the Camera
Resetting your Arlo Pro 4 camera is a quick and easy process that can be done in a few simple steps.
First, you need to disconnect the camera from the base station this can be done by unplugging the power cable that connects the two.
Once the camera is unplugged, you can then locate the reset button, which is located on the back of the camera.
This is a small recessed button, so you may need to use a paperclip or similar small object to press and hold the reset button for 10 seconds.
Once you have held the button down for the full 10 seconds, the camera will reset and automatically reboot itself.
Once the reboot is complete, you will need to reconnect the camera to your home WiFi network and reconnect the base station to the camera.
To do this, you will need to refer to the instructions in the Arlo Pro 4 user manual or check the Arlo support website.
After the camera and base station are reconnected, your Arlo Pro 4 camera is ready to be used.
By following these simple steps, you can easily reset your Arlo Pro 4 camera and get back to enjoying the security and convenience that your Arlo camera provides.
If you have any questions or need additional help, please refer to the user manual or contact Arlo support.
Unplugging the Camera and Its Base Station
Unplugging the Camera and Its Base Station is the first step to resetting your Arlo Pro 4 Camera.
It is important to unplug the camera and its base station before resetting as it will ensure that the reset process will take place successfully.
To do this, first remove the camera from its base station.
This can be done by simply pressing the release button on the side of the base station.
After the camera has been removed, unplug the power cable from both the base station and the camera.
Once the power cables have been removed, you are now ready to reset the camera.
Locating the Reset Button
Locating the Reset Button on your Arlo Pro 4 Camera is the first step in resetting it.
The Reset Button is a small, recessed button located on the back of the camera, so you will need to remove the camera from its base station before you can locate it.
Once you have located the Reset Button, you will need to press and hold it for 10 seconds.
This will reset the camera and trigger it to reboot itself.
During the reboot process, all of the settings on the camera will be reset to their original factory settings.
When the reboot is complete, you will need to reconnect the camera to your home WiFi network and the base station will need to be reconnected to the camera.
Depending on the type of WiFi network you have, these steps may vary slightly, but the basic process is the same.
Once the camera is reconnected to your home WiFi network and the base station is reconnected to the camera, your Arlo Pro 4 camera will be ready to use.
Pressing and Holding the Reset Button
Resetting your Arlo Pro 4 camera is a straightforward process, but there are a few steps you need to take to make sure it is done correctly.
The first step is to remove the camera from its base station and locate the reset button.
This is a small recessed button located on the back of the camera.
To reset the camera, press and hold the reset button for 10 seconds.
It is important to keep the button pressed for the full 10 seconds, otherwise the reset may not take place.
During the 10 second reset process, the camera will reboot itself and will be ready to use once the process is complete.
During this time, it is important to keep the camera away from any electronic devices that may interfere with the reset process.
It is also important to make sure the camera is kept away from any other Arlo Pro 4 cameras that may be connected to the same base station, as this could cause interference.
Once the reset process is complete, the camera will need to be reconnected to your home WiFi network, and the base station will need to be reconnected to the camera.
This can be done by following the instructions provided in the camera’s manual.
Once reconnected, your Arlo Pro 4 camera will be ready to use.
It is important to remember that resetting your Arlo Pro 4 camera will erase all of its settings, so you will need to set it up again from scratch.
This includes setting up the motion detection, recording schedule, and other settings.
Thus, it is important to make sure you have all of the necessary information before you reset the camera.
Reconnecting the Camera and Base Station
Reconnecting the Arlo Pro 4 camera and its base station is the final step in the reset process.
After the reset button is held for 10 seconds, the camera will reset itself and reboot.
After the reboot, the camera will need to be reconnected to your home WiFi network and the base station will need to be reconnected to the camera.
The first step in reconnecting your camera and base station is to locate the base station.
It should be near your router and will likely have a blinking LED light indicating that it is in setup mode.
If the light is not blinking, press the Sync button on the base station to put it into setup mode.
Once the base station is in setup mode, you can connect the camera to your home WiFi network.
To do this, first make sure that your camera is not connected to the base station.
If it is, press and hold the Sync button on the base station for 3 seconds to put the base station into pairing mode.
Once the camera is no longer connected to the base station, you can use the Arlo app on your phone or tablet to connect the camera to your home WiFi network.
Follow the on-screen instructions in the Arlo app to complete the setup process.
Once the camera is connected to your home WiFi network, you can reconnect it to the base station.
To do this, press and hold the Sync button on the base station for 3 seconds to put it into pairing mode.
Then, press the Sync button on the back of the camera for 3 seconds to connect it to the base station.
Once the camera is connected to the base station, your Arlo Pro 4 camera will be ready to use.
You can now start using the camera for its intended purpose.
Final Thoughts
By following these simple steps, you now have the tools to reset your Arlo Pro 4 camera whenever you need to.
Resetting your Arlo Pro 4 allows you to keep your camera up to date and running smoothly, and ensures that it is secure and ready to use.
Now that you know how to reset your Arlo Pro 4, its time to get out there and put your new skills to the test.