Smart plugs are becoming increasingly popular for their convenience and potential to save money, but if yours won’t connect, it can be very frustrating.
In this article, we’ll help you get to the bottom of why your smart plugs won’t connect and provide step-by-step instructions on how to fix the issue.
We’ll also discuss what smart plugs are, what could be causing the connectivity issues, how to check your Wi-Fi signal strength, how to reset and move your plugs, how to check for software updates, and when to contact your internet service provider.
So read on to unlock the answer and get your smart plugs up and running again.
Table of Contents
Short Answer
There could be several reasons why your smart plugs won’t connect.
First, make sure the plugs are in range of your WiFi network.
Additionally, check that your router is properly configured and that your network settings are correct.
Finally, ensure that you have installed the correct app and that your phone and the device are up to date.
If you have double checked all of these things and the plugs still won’t connect, contact the manufacturer for further assistance.
What are Smart Plugs?
Smart plugs are the perfect solution for anyone looking to take control of their home’s appliances and electronics.
By connecting them to your home’s Wi-Fi network, you can easily turn devices on and off remotely, or even set them to turn on and off at certain times of the day.
With the help of a compatible app, you can even create automated routines that save you time and energy.
Smart plugs are easy to install and use, with no need for extensive wiring or complicated setup processes.
However, there may be times when your smart plugs won’t connect to your Wi-Fi network.
In these cases, it’s important to understand the possible causes and know what steps you can take to get them back up and running.
Common Reasons for Smart Plug Connectivity Issues
When it comes to troubleshooting smart plugs that wont connect to your homes Wi-Fi network, there are a few common reasons you should consider.
One of the most common issues is a weak signal.
If the device is too far away from the router, the signal may not be strong enough to connect the plug.
Another common issue is incorrect setup.
Make sure the plug is properly connected to the router and that all required settings are configured correctly.
Interference from other devices can also cause connectivity issues.
If you have other devices that are using the same bandwidth, they could be interfering with the signal.
Finally, make sure you check for any software updates.
If the devices software is out of date, it may not be able to connect to the network.
How to Check Your Wi-Fi Signal Strength
When troubleshooting why your smart plug wont connect to your homes Wi-Fi network, one of the first things you should check is the strength of your wireless signal.
The signal strength of your Wi-Fi network can be indicative of a number of potential issues, such as interference from other devices, an outdated router, or not being in the optimal location.
So its important to ensure that your Wi-Fi network is strong enough to connect your smart plug.
To check your Wi-Fi signal strength, youll need to access your routers settings.
This can be done through your computer, mobile device, or even through the router itself.
Once youre in the router settings, youll be able to see the signal strength of your network.
If your signal strength is low, you may need to move your router to a better location or invest in a Wi-Fi extender to give your network a boost.
You may also want to reduce the number of devices connected to your network, as too many connected devices can cause your Wi-Fi signal to weaken.
How to Reset Your Smart Plug
Resetting your smart plug is one of the simplest solutions for getting it to connect to your home Wi-Fi network.
This can be done by pressing and holding the reset button for about 10 seconds, which will reset the device and clear any existing network settings.
To do this, you’ll need to locate the reset button on your smart plug.
It may be located on the underside of the device, or it may be a small button on the side.
Once the reset is complete, the smart plug should be ready to connect to your home Wi-Fi network.
Before you reset your smart plug, make sure you have your home Wi-Fi password handy.
This is necessary to connect the device to your network.
Additionally, you’ll want to make sure that you’re in range of your router and that your router is broadcasting a strong signal.
If your signal is weak, the device may not be able to connect.
Once you’ve reset the device and you have your Wi-Fi password, you can attempt to connect the smart plug to your home network.
Depending on your device, you may need to use a companion app to configure the device.
This app will prompt you to enter your Wi-Fi password and provide instructions on how to connect the device.
If your device doesn’t require the use of a companion app, you can typically connect the plug to your network by pressing and holding the reset button for a few seconds.
Once your device is connected, you should be able to control it with your mobile device or voice assistant.
If you’re still having trouble connecting your smart plug, you may want to try moving it closer to your router or checking for any software updates.
If none of these solutions work, you may need to contact your internet service provider for advice.
How to Move Your Smart Plug Closer to the Router
Moving your smart plug closer to your router is one of the most effective methods for improving the connection between the two devices.
This is because the signal strength of your router’s Wi-Fi network diminishes the further away you get from it.
By physically moving your smart plug closer to the router, you can improve the signal strength and hopefully get the two devices to communicate properly.
When moving your smart plug closer to the router, make sure that it is within range of the router’s antenna.
This will ensure that the signal is strong enough for the two devices to communicate.
Additionally, try to keep the device away from any walls, furniture, or electronics that could interfere with the signal.
If possible, try to place the smart plug in the same room as the router.
This will reduce the amount of obstacles in the way of the signal, making it easier for the two devices to communicate.
However, if the router is located in a different room, you can use a Wi-Fi extender to boost the signal strength.
When moving your smart plug, you may also need to reconfigure it.
Most devices have a reset button that you can use to reset the device back to its factory settings.
After resetting the device, you can then connect it to your home’s Wi-Fi network using the instructions provided by the manufacturer.
In summary, if your smart plug won’t connect to your home’s Wi-Fi network, try moving it closer to the router.
Additionally, make sure that the device is within range of the router’s antenna and away from any walls, furniture, or electronics that might interfere with the signal.
If the router is located in a different room, consider using a Wi-Fi extender to boost the signal.
Finally, you may need to reset the device and reconfigure it to connect to the Wi-Fi network.
Checking for Software Updates
When it comes to troubleshooting why your smart plug won’t connect, one of the first steps you should take is checking for any software updates.
It is possible that your device may be running an outdated version of the software, which could be causing the connection issues.
To check for software updates, you can typically find the update or check for updates option in the device’s settings.
If you find that an update is available, make sure to download and install it before attempting to reconnect your smart plug.
Additionally, it is important to make sure that your homes Wi-Fi network is up-to-date as well.
If you are running an older version of the router’s software, this could be causing the connection issues.
Contacting Your Internet Service Provider
When all other troubleshooting steps have failed and your smart plug still wont connect, it may be time to contact your internet service provider for advice.
Your ISP can help you diagnose the issue and provide more detailed advice than what is available online.
When contacting your ISP, it is important to provide as much information as possible.
This includes the brand and model of your smart plug, the type of router you are using, and the exact steps you have taken to try and resolve the issue.
Your ISP may be able to provide more specific troubleshooting advice based on your particular setup or suggest alternatives.
Your ISP may also be able to provide a stronger signal to your home or suggest ways to minimize interference from other devices.
If your router is more than five years old, they may even suggest a newer model that is better suited to your homes needs.
It is important to remember that the issue may not necessarily be with your smart plug itself, so it is important to contact your ISP if all other troubleshooting steps have failed.
They can help you identify and correct any issues with your homes Wi-Fi signal that may be preventing your smart plug from connecting.
Final Thoughts
Smart plugs are an innovative way to control your home’s appliances and electronics with ease.
While they are generally easy to set up, there may be times when they will not connect to your home’s Wi-Fi network.
This can be due to a variety of issues, such as a weak signal, incorrect setup, or interference from other devices.
To help fix this issue, you can try resetting the device, moving it closer to the router, or checking for any software updates.
If none of these solutions work, then you may need to contact your internet service provider for advice.
With these helpful tips, you can now easily unlock the answer to why your smart plugs won’t connect.