How To Check Ring Doorbell Power? (3 Simple Steps)


Are you having trouble with your Ring Doorbell? Don’t worry, you’re not alone! If you’re having issues with your Ring Doorbell, it’s likely due to either a low voltage or a faulty transformer.

In this article, we’ll be exploring how to check the power on your Ring Doorbell in three simple steps.

We’ll cover what you’ll need, how to remove the faceplate, locating the terminals, checking the voltage, and what to do if the voltage is low.

We’ll also look at how to check the transformer, and when to contact a professional electrician for help.

So, let’s get started!

Short Answer

To check the power of your Ring Doorbell, you will need to look at the back of the device.

On the back you should see a green LED light which indicates that power is being supplied to the doorbell.

You can also check the voltage level of the battery by pressing the setup button on the back of the doorbell and looking for a reading on the voltage meter.

If the voltage is above 12V then your Ring Doorbell is receiving enough power to work properly.

What You’ll Need

If you’re looking to check the power of your Ring Doorbell, there are a few things you’ll need to have on hand.

First, you’ll need a small Phillips head screwdriver.

This is necessary to remove the faceplate of your doorbell.

You’ll also need a multimeter to check the voltage between the two small terminals that you’ll find once you remove the faceplate.

Lastly, if the voltage is lower than 16 volts, you may need to check your transformer or contact a professional electrician to help you troubleshoot the issue.

All of these items should be easy to find at your local hardware store or online.

Removing the Faceplate

Removing the faceplate of your Ring Doorbell is the first step in checking its power.

To do this, you’ll need a small Phillips head screwdriver.

Start by turning off your power at the breaker box and then unscrewing the two screws that hold the faceplate in place.

Once the screws are removed, gently pull the faceplate away from the wall to expose the interior of the doorbell.

You’ll then be able to locate the two small terminals that supply power to the doorbell.

Locating the Terminals

Checking the power of your Ring Doorbell is an easy task that can be completed in just three simple steps.

The first step is to remove the faceplate of your doorbell.

This can be done with a small Phillips head screwdriver.

Remove the screws and set them aside in a safe place.

Once the faceplate is removed, you will be able to locate the two small terminals.

These terminals are where you will need to use the screwdriver to check the voltage.

Make sure that you are careful not to touch any wires or other components while checking the power.

It is important to note that the voltage between the two terminals should read between 16 and 24 volts.

If the voltage is lower than 16 volts, this indicates that there is an issue with the power for your Ring Doorbell.

You may need to check your transformer or contact a professional electrician to help you troubleshoot the issue.

Checking the Voltage

When it comes to checking the power of your Ring Doorbell, the most important step is to measure the voltage between the two small terminals.

This can be done with a small Phillips head screwdriver.

First, you will need to remove the faceplate of the doorbell.

This is usually done by unscrewing the two screws on the faceplate.

Once the screws are removed, the faceplate should come off easily.

Next, you will need to locate the two small terminals.

These can usually be found on the top and bottom of the doorbell.

Once you have located them, use the screwdriver to check the voltage between them.

The voltage should read between 16 and 24 volts.

If the voltage is within this range, then you can be sure that your power is good and your doorbell should be working properly.

If the voltage is lower than 16 volts, then you may need to check your transformer or contact a professional electrician to help you troubleshoot the issue.

If the Voltage is Low

If the voltage is lower than 16 volts, you may need to check your transformer or contact a professional electrician to help you troubleshoot the issue.

This means that either your transformer is not providing enough power or it is not providing the correct voltage.

If the voltage is low, the first step is to check the transformer.

Make sure it is plugged in and that the fuse is working properly.

If the transformer is functioning correctly, then the power supply from the transformer may not be providing the correct voltage.

In this case, it is best to contact an experienced electrician to inspect and repair the power supply.

In some cases, the power supply may be working correctly, but the Ring Doorbell itself may be malfunctioning.

This could be due to a faulty wiring connection, or a loose connection on the device.

To check for this, use a multimeter to test the voltage between the two terminals on the Ring Doorbell.

If the voltage is lower than 16 volts, then you may need to replace the device.

Finally, if the power supply and the device are both working correctly, then the issue could be related to the wiring in your home.

If this is the case, then it is best to contact an experienced electrician to inspect the wiring and repair any issues.

In conclusion, checking the power of your Ring Doorbell is easy.

All you need is a small Phillips head screwdriver and a multimeter.

First, remove the faceplate of your doorbell and locate the two small terminals.

Then, check the voltage between them.

If the voltage reads between 16 and 24 volts, then your power is good and your doorbell should be working properly.

If the voltage is lower than 16 volts, then you may need to check your transformer or contact a professional electrician to help you troubleshoot the issue.

Checking the Transformer

Once you have checked the voltage of your Ring Doorbell, it is important to check the power source or transformer to make sure it is providing the proper power.

This can be done easily by using a multimeter to test the voltage of the transformer.

First, locate the transformer and unscrew the plate to expose the wiring.

Then, use the multimeter to test the voltage between the two terminals.

The voltage should read between 16 and 24 volts, indicating that the transformer is providing the proper power.

If the voltage is lower than 16 volts, you may need to replace the transformer or contact a professional electrician to help you troubleshoot the issue.

In some cases, the transformer may be connected to a dimmer switch.

If this is the case, you will need to adjust the dimmer switch to provide the proper power.

You should always ensure that the voltage does not exceed the maximum voltage listed on the transformer.

Overvoltage can cause damage to your doorbell and void your warranty.

It is best to contact a professional electrician to ensure that everything is done correctly.

Finally, if your doorbell is still not working, it may be due to a dead battery.

In this case, you will need to replace the battery.

To do this, locate the battery compartment and unscrew the cover to access the battery.

Remove the old battery and replace it with a new one.

Make sure the battery is the same voltage and type as the old one.

If you are unsure, it is always best to consult the Ring Doorbell user manual or contact a professional electrician.

Once the battery is replaced, your Ring Doorbell should be up and running.

Contacting a Professional Electrician

When it comes to checking the power of your Ring Doorbell, it can be tricky to do it on your own.

Thats why its a good idea to contact a professional electrician if youre having trouble troubleshooting the issue.

A professional electrician can help you troubleshoot the issue and determine the best course of action to get your doorbell back up and running quickly.

They can also provide advice and guidance on what to do if the voltage is lower than 16 volts.

The electrician will likely start by testing the voltage between the two small terminals on the Ring Doorbell faceplate.

If the voltage is lower than 16 volts, the electrician will look into the issue further and may recommend replacing the transformer or checking the wiring.

Its important to note that while it may seem like a hassle to contact a professional electrician, its often the best way to ensure that your doorbell is running properly and that the issue is resolved quickly and efficiently.

In addition, an electrician can help ensure that any potential safety risks associated with a malfunctioning doorbell are addressed properly.

If youre having trouble troubleshooting the power issue of your Ring Doorbell, dont hesitate to contact a professional electrician.

They can provide you with the expertise and knowledge to get your doorbell back up and running in no time.

Final Thoughts

Now you know the simple steps to check the power of your Ring Doorbell! All you need is a Phillips head screwdriver and a little bit of knowledge.

Remember, if the voltage is lower than 16 volts, you may need to take a look at your transformer or contact a professional electrician to get to the bottom of the issue.

With all of this in mind, you can confidently check the power of your Ring Doorbell and make sure it’s working properly.

James Lambert

Repairing and upgrading houses is a hobby that James Lambert is very dedicated to. Many of our more complex home improvement guides are written by him. His objective is to do repairs around the house in the most sensible and cheap manner possible.

Recent Posts