How To Remove ADT Video Doorbell (Step-By-Step Directions)


Are you ready to upgrade your home security system? Installing a video doorbell is a great way to keep your home safe and secure, but what do you do when it’s time to take it down? Removing an ADT Video Doorbell can be intimidating, but this article will guide you through the process step-by-step.

We’ll cover how to disconnect the power source, unscrew the mounting plate, carefully remove the doorbell, disconnect the wiring, use a flathead screwdriver to remove it, and how to replace it.

We’ll also cover some of the benefits of replacing an old doorbell.

So let’s get started!

Short Answer

To remove an ADT video doorbell, use a Phillips head screwdriver to remove the two screws on the back of the doorbell.

Once the screws are removed, the doorbell can be pulled off the wall.

Disconnect the wires from the doorbell and then use a flathead screwdriver to remove the mounting plate from the wall.

Finally, use a damp cloth to clean the area and then replace with a new doorbell.

Disconnect Power Source

When it comes to removing an ADT video doorbell, it is important to start by disconnecting the power source from the wall outlet.

This can be done by unplugging the power cord from the wall outlet, or if the power cord is hardwired directly into the wall, you will need to turn off the breaker supplying power to the doorbell.

It is important to make sure that the power is completely disconnected before doing any other work, as this will prevent any unexpected electrical shocks.

Once the power is disconnected, you can proceed with the next step.

Unscrew Mounting Plate

Unscrewing the mounting plate of an ADT video doorbell is an important step in the removal process.

To begin, make sure the power source from the wall outlet is disconnected.

Once the power is off, locate the mounting plate on the wall and unscrew the screws using a screw driver.

It is important to use caution when removing the screws, as they may have been installed tightly.

Be sure to keep track of the screws, as they will be needed to reattach the mounting plate to the new doorbell once it is installed.

Once the screws are removed, carefully pull the mounting plate from the wall, taking care not to damage the wall or the mount.

With the mounting plate removed, you can then disconnect the wiring and remove the doorbell.

Carefully Remove the Doorbell

Removing an ADT video doorbell is a relatively simple process that can be completed in just a few minutes.

Before removing the doorbell, it is important to disconnect the power source from the wall outlet.

This will ensure that no electricity is flowing to the doorbell while it is being removed.

Once the power has been disconnected, the next step is to unscrew the mounting plate from the wall.

Once the plate has been removed, the doorbell can then be carefully removed.

When removing the doorbell, it is important to be careful not to damage any of the wiring.

Take care to disconnect the wiring from the back of the doorbell, as this will ensure that the wiring will not be damaged during the removal process.

Once the wiring has been disconnected, use a flathead screwdriver to remove the mounting plate and the doorbell from the wall.

This will ensure that the doorbell can be easily replaced.

Once the doorbell has been removed, it can then be replaced with a new one.

It is important to ensure that the wiring is connected properly to the new doorbell before it is mounted to the wall.

Once the new doorbell is mounted and wired, the power source can be reconnected to the wall outlet.

With a few simple steps, an old ADT video doorbell can be removed and replaced with a new one.

Disconnect the Wiring

When removing an ADT video doorbell, it is important to first disconnect the wiring before proceeding with the rest of the removal process.

This will ensure that the power source is completely removed and that no electrical damage will occur.

To disconnect the wiring, locate the wiring that is connected to the doorbell and then carefully loosen the screws that hold it in place.

Once the screws have been loosened, carefully detach the wiring from the doorbell.

Be sure to keep track of each wire and its corresponding connections so that they can be reconnected when reinstalling the doorbell.

After the wiring has been disconnected, the doorbell can be safely removed and replaced with a new one.

Use a Flathead Screwdriver to Remove Doorbell

Removing an ADT video doorbell is a simple process that requires only a few tools and a few minutes of your time.

The first step is to disconnect the power source from the wall outlet.

Once the power is disconnected, you can then use a flathead screwdriver to unscrew the mounting plate from the wall.

You will need to be careful when removing the mounting plate to avoid damaging the doorbell or the wall.

Once you have removed the mounting plate, you can then carefully remove the doorbell and disconnect the wiring.

Make sure you dont tug on the wiring as you dont want to damage any of the internal components.

Once the wiring is disconnected, you can then use a flathead screwdriver to remove the mounting plate and the doorbell from the wall.

This is done by unscrewing the screws that hold the plate and doorbell in place.

Once the doorbell is removed, it can then be replaced with a new one.

You will need to make sure that the wiring is connected correctly and that the mounting plate is securely fastened to the wall.

Once the new doorbell is in place, you can then turn the power back on and test the doorbell.

With just a few simple steps, an old ADT video doorbell can be removed and replaced with a new one.

Replace the Doorbell

Replacing an ADT video doorbell is an easy process that can be completed in just a few minutes.

First, youll need to disconnect the power source from the wall outlet.

This will ensure that the power is completely disconnected and you wont accidentally hurt yourself while replacing the doorbell.

Then, unscrew the mounting plate from the wall and carefully remove the doorbell.

To do this, make sure to use the correct tools for the job.

A flathead screwdriver should do the trick.

Once the doorbell is removed, you can disconnect the wiring, which can be done with a pair of wire cutters.

After the wiring is disconnected, you can use a flathead screwdriver to remove the mounting plate and the doorbell from the wall.

Once the doorbell is removed, you can replace it with a new one.

To install the new doorbell, start by connecting the wiring according to the manufacturers instructions.

Then, mount the doorbell to the wall using the appropriate screws, and reconnect the power source to the wall outlet.

Finally, test the doorbell to make sure its functioning properly.

With these simple steps, you can easily replace an old ADT video doorbell with a new one.

Benefits of Replacing an Old Doorbell

Replacing an old doorbell with a new one can bring many benefits.

Not only will a new doorbell provide improved security and convenience, but it can also be a stylish addition to your home.

A new video doorbell can help you keep an eye on your front door, allowing you to see who is at your door before you open it.

This can help you to feel more secure and provide an extra layer of safety.

Additionally, many video doorbells come with motion sensors that can detect movement outside the door.

This can be helpful for alerting you to potential intruders or visitors that you may not have noticed otherwise.

The motion sensors can also be set to alert you to any unexpected movement around your home, so you can be aware of any potential danger.

In addition to the security and convenience features, a new video doorbell can also add a bit of style to your home.

With a variety of colors, shapes, and sizes to choose from, you can find a doorbell that fits your homes aesthetic.

Many doorbells also come with customizable settings, allowing you to adjust the sound and volume of the bell.

This can be especially helpful if you have guests coming over who may be sensitive to loud noises.

Overall, replacing an old doorbell with a new one can provide many benefits.

From improved security and convenience to a stylish addition to your home, a new video doorbell can make a great addition to any home.

Final Thoughts

Replacing an old ADT video doorbell with a new one is a simple process that can be completed in just a few minutes.

With the steps outlined above, you can easily remove an old doorbell and replace it with a new one, giving your home an updated look and feel.

Installing a new doorbell can also offer additional security and convenience features that make your home safer and more comfortable.

Now that you know how to remove an ADT video doorbell, why not give it a try?

James Lambert

Repairing and upgrading houses is a hobby that James Lambert is very dedicated to. Many of our more complex home improvement guides are written by him. His objective is to do repairs around the house in the most sensible and cheap manner possible.

Recent Posts