How To Remove an ADT Home Security System – Step-by-Step Guide

Your home is your sanctuary, and ensuring that it is secure is a priority.

If you are looking to remove your ADT home security system, you may be wondering where to start.

In this article, we will provide you with a comprehensive step-by-step guide on how to remove an ADT home security system, from why you should remove it to disposing of the equipment and wiring.

By following these steps, you can have peace of mind that your home is secure and free from any unnecessary equipment.

Lets get started!

Table of Contents

Short Answer

To remove an ADT home security system, first disconnect the alarm system from the power source.

Next, remove all of the sensors and components from the walls and doors.

Finally, contact ADT to have the system deactivated and removed from your account.

It is important to note that you may also need to return any leased security equipment to ADT when you have your system removed.

Why You Should Remove an ADT Home Security System

When it comes to home security, there is no denying that an ADT system is one of the best options out there.

ADT systems are reliable, secure, and come with a variety of features that can protect your home and family.

But what if you no longer need an ADT system? In that case, you will need to know how to remove it.

Removing an ADT home security system is an important process and should not be taken lightly.

After all, you are dealing with a system that is designed to keep your home and family safe.

That means that it is essential to make sure that the process is done correctly.

A poorly executed removal process could leave your home and family vulnerable to intruders.

Even if you do not plan on using an ADT system for the foreseeable future, it is still important to make sure that the system is safely disconnected and removed.

That way, you can make sure that your family and home are protected from any potential harm.

In addition to making sure that your home and family are safe, you should also consider the financial implications of removing an ADT system.

Depending on the type of system you have, you may be able to save money by disconnecting and removing it.

For instance, some homeowners may be able to save money on their homeowners insurance policy by removing an ADT system.

Finally, removing an ADT system may also help you save time and energy.

By taking the time to properly disconnect and remove the system, you can avoid having to deal with any complicated or time-consuming issues in the future.

All in all, removing an ADT home security system can be an important process that should not be taken lightly.

By taking the time to properly disconnect and remove the system, you can make sure that your home and family are safe and secure.

Moreover, you may also be able to save money and time in the process.

The Steps to Contact ADT

Removing an ADT home security system is a relatively straight-forward process if you have the right information.

The first step in the process is to contact ADT and inform them that you are no longer using their system.

This is an important step, as ADT often requires you to complete a formal deactivation process before you can begin to dismantle the system.

Contacting ADT is easy.

You can call them directly using the toll-free number provided on their website, or you can log into your ADT account to initiate the deactivation process.

If you have a partner company that handles your ADT system (such as an alarm installation company or monitoring service), they may also be able to help you deactivate the system.

When contacting ADT, you will need to provide information such as the address of the home where the system is installed, as well as the account number associated with the system.

ADT may also ask you to provide additional information such as the serial number of the control panel, as well as any additional security codes that were set up when the system was installed.

Once you have provided this information, ADT can confirm that your security system has been deactivated.

Once you have contacted ADT and deactivated the system, you can begin the process of removing the equipment and wiring.

This is the next step in the process of removing an ADT home security system.

How to Disconnect the Equipment and Wiring

Removing an ADT home security system from your home is a relatively straightforward process.

Before you begin, make sure to contact ADT and inform them that you are no longer using their system.

Once youve done this, you can begin the process of disconnecting the equipment and wiring.

First, turn off the power to the control panel.

This will usually require unplugging the power cord from the wall.

Once the power is off, you can then remove the cover of the control panel.

Once the cover is off, you will be able to access the wires connected to the main board.

Carefully unhook these wires and set them aside in a safe place.

Next, you will need to remove any sensors or other accessories from the walls and windows.

Depending on the type of system, this may require unscrewing the sensors or using a screwdriver to remove the adhesive that secures them in place.

Once all of the sensors and accessories have been removed, you can then dispose of the equipment and wiring.

With these steps, you can easily remove an ADT home security system from your home.

Be sure to follow all safety precautions and contact ADT beforehand to inform them that you are no longer using their system.

Turning Off the Power to the Control Panel

Turning off the power to the control panel is an important first step to removing an ADT home security system.

You will need to locate the power switch on the back of the control panel.

Flip the switch off to disconnect the power to the system.

Once the power is disconnected, the system should no longer be operational.

It is important to remember that some models of ADT home security systems are powered by a backup battery, so you may need to disconnect this as well.

To do this, remove the backup battery from the control panel.

Some models may require a screwdriver to remove the battery.

Once the backup battery is removed, the system should no longer be operational.

Once the power is disconnected, the next step is to remove the cover of the control panel.

You will need to locate the screws that hold the cover in place, and unscrew them with a screwdriver.

Once the screws are removed, carefully lift the cover off the control panel and set it aside.

At this point, you should now have access to the wiring and components inside the control panel.

Before you proceed, make sure to double-check that the power to the system is disconnected.

You should also note the color of the wires and the order in which they are connected, so that you can re-connect them in the same order when reinstalling the system.

This will help ensure that the system works correctly once it is reinstalled.

Removing the Cover and Unhooking the Wires

Once you have contacted ADT and informed them that you no longer need their system, it is time to begin the process of removing it.

The first step is to turn off the power to the control panel.

Depending on the type of ADT system you have, this may involve shutting off the power from the breaker box or disconnecting the battery from the main control panel.

Once the power is off, you can then remove the cover of the panel and begin to unhook the wires.

The main board of the control panel will have several different wires connected to it.

These will include the power line, the phone line, and the alarm line.

Carefully disconnect each wire from the main board and set them aside.

It is important to make sure that all the wires are properly labeled so that you can reconnect them in the future if necessary.

Once the wires are disconnected, it is time to remove any sensors and other accessories from the walls and windows.

Depending on the type of system you have, this may involve unscrewing the sensors and other items from the walls or simply unplugging them from the main panel.

After all the sensors and accessories have been removed, you can then dispose of the equipment and wiring.

With these simple steps, you can easily remove an ADT home security system from your home.

Be sure to follow the instructions provided by the manufacturer to ensure the safe and secure removal of the system.

Removing Sensors and Accessories

The final step to removing an ADT home security system is to remove any sensors and other accessories from the walls and windows.

This can be a tedious task, as it involves unscrewing and removing each sensor and accessory.

Depending on the system, there may be a variety of sensors and accessories that need to be removed, such as motion detectors, door and window sensors, cameras, and other devices.

To remove the sensors and accessories, start by turning off the power to the control panel.

This will prevent any shocks or damages to the electronics.

Once the power is off, locate each sensor and accessory and unscrew it from the wall or window.

You may need a screwdriver or a wrench to unscrew the parts.

Once the sensor is unscrewed, gently pull it out of the wall or window and set it aside.

Repeat this process for each sensor and accessory until they are all removed.

It is important to be careful and gentle when removing the sensors and accessories.

If there is any damage to the equipment, it may be difficult to replace and could affect the performance of the system.

Additionally, if there is any wiring still connected to the sensors or accessories, be sure to disconnect it as well.

Once all the sensors and accessories have been removed and the wiring has been disconnected, the system is officially removed from your home.

Disposing of the Equipment and Wiring

Once you have removed all of the necessary components of your ADT home security system, it is time to dispose of the equipment and wiring.

The best way to do this is to take the components to a recycling center.

Disposing of the equipment responsibly will ensure that it is properly recycled.

Additionally, it will also help to protect the environment from any potential hazards from improperly disposed wiring or equipment.

If you are unable to take the equipment to a recycling center, you may consider donating the equipment to a local charity.

This is a great way to help those in need and reduce the environmental impact of the security system.

However, it is important to note that some charities may not accept the ADT equipment as it is not currently certified for use in their facilities.

Another option is to sell the equipment online.

There are many online marketplaces that allow you to sell used security equipment.

This is a great way to recoup some of the cost of the system and help someone else who may be in need of a security system.

Finally, you may also consider disposing of the equipment by throwing it away.

However, it is important to note that throwing away electronics can have a negative impact on the environment if not done properly.

To reduce the environmental impact, make sure to break down the components and place them in separate bags before throwing them away.

Once you have disposed of the equipment and wiring, your ADT home security system will be completely removed from your home.

With these simple steps, you can easily remove an ADT home security system from your home.

Final Thoughts

By following the steps outlined in this guide, you can easily remove an ADT home security system from your home.

Doing so is important because you can ensure that your home is secure and you wont be charged for a system you no longer use.