How to Remove Arlo Video Doorbell? (Here’s the Easy Way)


Do you have an Arlo Video Doorbell that you would like to remove? Perhaps you are moving to a new house or simply want to upgrade to a newer model.

Whatever the case may be, it is important to understand the right way to remove your video doorbell in order to avoid any costly damage.

In this article, we will take a look at the steps necessary to properly remove an Arlo Video Doorbell, the tools needed to do so, and what happens if you dont follow the right procedure.

So, if you are ready to get started, lets dive right in!

Short Answer

To remove your Arlo Video Doorbell, begin by turning off the power from the breaker box.

Next, unscrew the mounting screws and detach the doorbell from the wall.

Carefully unplug the power cable from the doorbell.

Finally, remove any screws securing the doorbell to the mounting plate and then lift the doorbell off the plate.

What Tools are Necessary to Remove an Arlo Video Doorbell?

Removing an Arlo Video Doorbell is a relatively simple process that requires minimal tools.

Before getting started, you’ll need to make sure you have a flat head screwdriver and a damp cloth on hand.

The flat head screwdriver can be used to loosen the mounting plate from the wall, while the damp cloth can be used to clean any remaining adhesive or screws after the doorbell is removed.

It is important to note that the power source for the doorbell must be disconnected before attempting to remove it.

Once all the necessary tools are gathered, the next step is to unscrew the mounting plate from the wall.

This can be done by inserting the flat head screwdriver into the slots of the mounting plate and gently twisting it until the plate is loosened.

Once the mounting plate is removed, the doorbell can be easily slid away from the wall.

Finally, the area around the mounting plate should be wiped down with the damp cloth to ensure that all remaining adhesive or screws are removed.

This will help ensure that the area is clean and ready for the installation of a new doorbell.

With these steps, the Arlo Video Doorbell can be removed quickly and safely.

Step 1

Removing an Arlo Video Doorbell is a simple process.

The first step is to make sure to disconnect the power source from the doorbell.

This can be done by unplugging the power cord or turning off the circuit breaker that supplies power to the doorbell.

It is important to make sure that the power is completely disconnected before moving on to the next step.

Once the power is disconnected, you can then proceed to unscrew the mounting plate from the wall using a flat head screwdriver.

The screws can be found on the back of the mounting plate and can be loosened with the screwdriver.

Once the mounting plate is removed, you can then slide the doorbell away from the wall.

This can be done by gently pulling the doorbell away from the wall.

Be sure to be careful when doing this, as to not damage the wall or the doorbell.

Finally, use a damp cloth to clean any remaining adhesive or screws from the wall.

With these steps, your Arlo Video Doorbell can be removed easily and safely.

Step 2

Once you have disconnected the power source from the Arlo Video Doorbell, its time to start the removal process.

The next step is to use a flat head screwdriver to unscrew the mounting plate from the wall.

Depending on how the doorbell was originally installed, this may require some gentle prying with the flat head screwdriver.

Once the plate is unscrewed and removed, you can slide the doorbell away from the wall.

This should be done carefully as the doorbell may still be connected to the mounting plate.

To ensure a safe and successful removal, make sure to use a damp cloth to clean any remaining adhesive or screws from the wall.

With these simple steps, your Arlo Video Doorbell can be removed easily and safely.

Step 3

Step 3 of removing an Arlo Video Doorbell is to simply slide the doorbell away from the wall.

Depending on the type of wall you have, you may need to use a bit of force to do this.

When sliding the doorbell away, make sure to hold the doorbell firmly so it doesn’t fall off the wall.

You can also use a small pry tool to help you slide the doorbell away.

Be sure to take your time when sliding the doorbell away, as you don’t want to damage the doorbell or the wall.

Once the doorbell has been removed, you can clean up any remaining adhesive or screws from the wall with a damp cloth.

This will help ensure that the wall is free of any debris or residue that could interfere with the installation of a new doorbell.

Step 4

The final step in removing an Arlo Video Doorbell is to use a damp cloth to clean any remaining adhesive or screws from the wall.

This is an important step in order to make sure there is no damage to the wall and ensure a clean finish when the doorbell is removed.

Use a damp cloth and some gentle cleanser to carefully wipe away any adhesive or screws that may have been left behind.

Be sure to use a gentle cleanser and not abrasive cleansers, as this could cause damage to the wall.

Once all of the adhesive and screws are removed, your Arlo Video Doorbell can be safely removed.

Other Considerations When Removing a Video Doorbell

Removing an Arlo Video Doorbell is a straightforward process, but there are a few additional considerations that should be taken into account.

First, if youre replacing your existing doorbell with a new model, you should ensure that the new doorbell is compatible with the existing wiring in your home.

Different models require different wiring, and if the wiring is not compatible, it could be a costly and difficult process to fix.

Second, you should make sure to check the voltage of the Arlo Video Doorbell before disconnecting the power source.

If the voltage is too low, the doorbell may not function properly.

Its important to check the voltage with a multi-meter to ensure that the doorbell is functioning correctly.

Third, you should also check the mounting plate to make sure that it is securely attached to the wall.

If the mounting plate is loose, it could cause the doorbell to become disconnected from the wall, which could be dangerous.

Make sure to tighten the screws and check the plate for any signs of wear and tear.

Finally, you should also remember to clean the wall after removing the Arlo Video Doorbell.

This will ensure that any residue or dirt left behind by the doorbell does not cause damage to the wall.

You can use a damp cloth or a mild detergent to clean the wall, and then use a dry cloth to remove any remaining moisture.

By following these steps, you can ensure that removing an Arlo Video Doorbell is a safe and straightforward process.

With these considerations in mind, you can be sure that the doorbell is removed safely and with minimal fuss.

What Happens if You Dont Remove the Doorbell Properly?

When it comes to removing an Arlo Video Doorbell, its important to do it properly for two reasons.

First, if you dont disconnect the power source before attempting to remove the doorbell, you can cause electrical damage to the device and the wiring.

Second, if you dont use a flat head screwdriver to unscrew the mounting plate, you may damage the wall and leave behind adhesive or screws.

Failing to remove the Arlo Video Doorbell properly can also leave you vulnerable to damage from moisture or animals.

If water gets into the wall, it can cause mold to form and lead to structural damage.

Additionally, if you dont remove the doorbell completely, animals or pests may find a way to access the wiring and damage it.

Finally, if you dont remove the doorbell properly, you may find it difficult to reinstall a new one.

If the mounting plate is damaged, it may not fit properly or stay in place.

Additionally, if the wall is damaged, you may need to patch or repair it before you can install a new doorbell.

In short, its important to take the time to remove your Arlo Video Doorbell properly.

By following the steps outlined above, you can avoid potential damage to the doorbell, the wall, and your wiring.

Additionally, youll make it easier to reinstall a new doorbell when the time comes.

Final Thoughts

Removing an Arlo Video Doorbell doesn’t have to be difficult.

By following the steps outlined above, you can easily and safely remove your doorbell.

It’s important to keep in mind that if you don’t remove the doorbell properly, you may damage your wall.

So, to get the job done right, be sure to use the right tools, disconnect the power source, and clean the wall afterward.

Now that you know how to remove an Arlo Video Doorbell, you can get started on the project with confidence.

James Lambert

Repairing and upgrading houses is a hobby that James Lambert is very dedicated to. Many of our more complex home improvement guides are written by him. His objective is to do repairs around the house in the most sensible and cheap manner possible.

Recent Posts