Is your Google Nest Hub screen cracked, scratched, or unresponsive? Replacing the screen is a much better option than replacing the entire device.
If you’re wondering how to replace your Google Nest Hub screen, you’ve come to the right place.
In this guide, we’ll walk you through all the steps you need to know to replace your screen, from gathering the tools and materials you’ll need to securing the new screen in place.
So let’s get started!
Table of Contents
Short Answer
Replacing the screen on a Google Nest Hub is a fairly simple process.
First, locate the screws on the back of the device and unscrew them.
Once unscrewed, the back cover of the Nest Hub should slide off, allowing you access to the internal components.
Then, locate and remove the old display.
Finally, install the new display and reassemble the device.
Once complete, the Nest Hub should be back in working order.
What You Need To Replace Google Nest Hub Screen
When it comes to replacing the Google Nest Hub screen, there are a few essential tools you’ll need to complete the task.
These include a Phillips head screwdriver, a flathead screwdriver, and tweezers.
It’s important to use the right tools for the job, as the wrong ones can cause damage to the device.
Additionally, you’ll need some basic knowledge of electronics to successfully complete the task.
The Phillips head screwdriver is needed to unscrew the back cover of the device.
This will give you access to the inner workings of the device.
Once the cover is removed, you’ll need a flathead screwdriver to carefully pry away the screen from the device.
Once the screen is removed, you’ll need to disconnect the cables that are connecting it to the device.
This is where the tweezers come in handy, as they’ll help you remove the frame from the device.
Once the frame is removed, you can place the new screen on the frame and reconnect the cables.
This is a delicate process, so make sure you take your time to make sure nothing gets damaged.
Once the new screen is in place, you can secure the back cover back on the device.
This will complete the task and your Google Nest Hub will be good as new.
Turning Off the Power
When it comes to replacing the Google Nest Hub screen, the first step is to make sure you turn off the power.
This is an important safety precaution, as it helps to avoid short circuiting the device.
To turn off the power, simply unplug the power cord from the wall outlet.
Once the power is off, you can begin to unscrew the back cover of the device.
When unscrewing the back cover, it is important to use the correct tool.
A Phillips head screwdriver is the ideal tool to use for this task.
It is important to be gentle when unscrewing the screws, as to not damage the screws or the device.
When all the screws have been removed, you can carefully pry the back cover away from the screen.
Once the back cover is removed, you will be able to access the cables connecting the screen to the device.
Disconnecting these cables is the next step in the process.
To do this, use tweezers to carefully unplug the cables from the device.
After this, you can use the tweezers to remove the frame surrounding the old screen.
Once the frame has been removed, you can place the new screen in its place.
Make sure to line up the cables with the device before plugging them in.
After the cables have been plugged in, you can secure the back cover back on using the Phillips head screwdriver.
Once the back cover has been secured, your Google Nest Hub will be good as new!
Unscrewing the Back Cover
When it comes to replacing a Google Nest Hub screen, the first step is to turn off the power and remove the back cover.
This can be done with a Phillips head screwdriver, which is usually included with the device.
With the power turned off, begin by unscrewing the back cover.
Be sure to take your time when doing this to avoid damaging the device.
Once the screws have been removed, you can carefully pry the back cover away from the Nest Hubs screen.
Unscrewing the back cover is an important step in replacing the Nest Hubs screen, as it will allow you to access the cables connecting the device and the screen.
Carefully Prying Away the Screen
Replacing the Google Nest Hub screen is a relatively simple task, but its important to be careful when prying away the screen so that you dont damage any of the components.
Start by turning off the power and unscrewing the back cover.
Once you have removed the cover, carefully pry away the screen with your flathead screwdriver.
Be sure to go slow so that you dont damage any of the delicate components inside.
Once youve successfully removed the screen, disconnect the cables connecting the screen to the device.
Now youre ready to remove the frame, which can be done using tweezers.
Simply place the tweezers around the edge of the frame and gently pull away.
After the frame is removed, youre ready to place the new screen on the frame.
Reconnect the cables, then secure the cover back on.
Your Google Nest Hub will be good as new!
Disconnecting the Cables
Replacing the Google Nest Hub screen requires a few basic tools, including a Phillips head screwdriver, a flathead screwdriver, and tweezers.
After gathering your supplies, start by turning off the power to the device.
Next, use the Phillips head screwdriver to unscrew the back cover of the Nest Hub.
Carefully pry the back cover away from the screen and set it aside.
Once the back cover is removed, you will need to disconnect the cables that are connecting the screen to the device.
Depending on the type of Google Nest Hub, the cables may include a ribbon cable, a small black connector, and/or a flat cable.
Using tweezers, carefully remove the cables from the device.
Once the cables are disconnected, you can remove the frame that holds the screen in place.
You may need to use the flathead screwdriver to carefully remove the frame.
With the frame removed, you can now place the new screen in the frame.
Connect the cables back onto the device, making sure that they are securely in place.
Finally, secure the back cover back on with the Phillips head screwdriver and turn on the power.
Your Google Nest Hub will be good as new!
Removing the Frame With Tweezers
Removing the frame with tweezers is an important step when replacing the Google Nest Hub screen.
It requires careful attention and a steady hand to ensure the frame is removed without damaging the device or the screen.
Start by using the flathead screwdriver to carefully pry the frame away from the device.
Then, use the tweezers to gently grip the frame and pull it away from the screen.
Be sure to use steady, even pressure and move the tweezers slowly to ensure that the frame does not come away too quickly or too forcefully.
Doing so could potentially cause damage to the device or the frame.
Once the frame is removed, the process of replacing the screen can begin.
Placing the New Screen on the Frame
Once you have all the necessary tools and the old screen removed, you are now ready to place the new screen on the frame.
To ensure a proper fit, it is important to make sure that the new screen sits flush with the frame.
It helps to place the frame on a flat surface and to work with both hands.
Start by placing the frame on the table and orienting it so that the slot for the ribbon cable is towards you.
Position the new screen on the frame so that the ribbon cable slot is aligned with the slot on the frame.
Make sure that the ribbon cable is tucked away and out of the way.
Once the screen is in position, you can begin to secure it.
You can use the flathead screwdriver to gently press down on the edges of the new screen, ensuring that it is firmly in place and without any gaps.
When you are satisfied with the positioning, you can take the Phillips head screwdriver and use it to tighten the screws on the frame.
This will keep the screen firmly in place.
Now that the screen is securely in place, you can reconnect the cables.
Start by connecting the ribbon cable.
Make sure that it is securely in place, and then reattach the other cables.
Once all the cables are reconnected, you are ready to go!
Your Google Nest Hub should now be good as new.
The process of replacing the screen was relatively simple and only required a few basic tools.
With your new screen in place, you can enjoy the convenience of the Google Nest Hub once again.
Securing the Cover Back On
Once you have successfully replaced the Google Nest Hub screen, the final step is to secure the back cover back on.
This is an important step, as it ensures that the device is properly sealed and protected from dust and other elements.
Start by aligning the back cover with the device, making sure that the ports and connectors line up.
Then take the Phillips head screwdriver and use it to fasten the screws back in place.
Make sure to not over-tighten the screws, as this could damage the device.
Once all the screws are in place, your Google Nest Hub should be good as new!
Final Thoughts
Replacing the Google Nest Hub screen is a simple and quick process that only requires a few basic tools.
With the instructions provided, you should have no trouble replacing your device’s screen in no time.
Now that you know what you need and how to do it, go ahead and give it a try!