Do you ever find yourself being woken up in the middle of the night by your doorbell ringing outside? If so, youre not alone! Many people struggle with their Ring Doorbells ringing from the slightest motion outside their front door.
But dont worry! In this article, well discuss the causes of your doorbell ringing outside, and provide you with an array of tips and solutions to help you stop it from happening.
Well talk about how to reduce motion sensitivity, apply privacy zones, adjust the motion detection range, and more.
So, if youre ready to stop your Ring Doorbell from ringing outside, read on!
Table of Contents
Short Answer
One way to stop your Ring doorbell from ringing outside is to adjust the motion detection settings.
In the Ring app, you can adjust the motion sensitivity of the camera, as well as the distance range that it will detect.
You can also adjust the Ring app settings to only respond to people, as opposed to other moving objects like animals or cars.
Finally, you can also turn off the motion notifications entirely, so that your doorbell won’t ring outside at all.
Why Is My Ring Doorbell Ringing Outside?
When your Ring Doorbell is ringing outside, it may be due to the motion detection sensitivity being too high.
This can cause the doorbell to pick up even the slightest movements, resulting in it ringing even when no one is at your door.
Additionally, if you have a particularly busy area in front of your home with a lot of foot traffic, your doorbell may be ringing more often than youd like.
Finally, if you have a large yard or property, the motion detection range of your doorbell may also be too large, causing it to pick up activity from further away.
All of these can result in your Ring Doorbell ringing outside even when theres no one at your door.
How to Reduce Motion Sensitivity of Your Doorbell
Reducing the motion sensitivity of your doorbell is one of the simplest and most effective ways to stop your Ring Doorbell from ringing outside.
To do this, all you need to do is go into the settings in the Ring app.
There you will find the motion sensitivity settings and you can adjust them to your desired level.
When you go into the settings, you will be presented with a slider that allows you to adjust the motion sensitivity of your doorbell.
The lower the setting, the less movement will cause your doorbell to ring.
This is a great way to make sure that your doorbell only rings when there is significant movement outside your door.
In addition to adjusting the motion sensitivity, you can also apply a privacy zone within the app.
This allows you to specify which areas you don’t want monitored, so that your doorbell won’t ring when motion is detected in those areas.
This is especially useful if you have pets or other motion sources that you don’t want to trigger your doorbell.
Finally, you can adjust the motion detection range of your doorbell by using the Advanced Motion Settings.
This allows you to set the range at which your doorbell will detect motion, so that you can make sure that your doorbell doesn’t ring if there is motion outside your desired range.
By following these simple steps, you can easily prevent your Ring Doorbell from ringing outside.
With the right settings, you can be sure that your doorbell will only ring when there is genuine movement outside your door.
How to Apply a Privacy Zone
If you are looking for a way to stop your Ring Doorbell from ringing when motion is detected outside, one of the best solutions is to apply a privacy zone within the Ring app.
A privacy zone allows you to specify which areas you dont want monitored, so your Ring Doorbell will not ring when motion is detected in that area.
To apply a privacy zone, open the Ring app on your smartphone and tap the Devices tab.
Select the Ring Doorbell you want to create a privacy zone for and select Device Settings.
From here, you can select Motion Settings and then Create a Privacy Zone.
You will then be prompted to draw the area you dont want monitored.
When you have finished, tap Save and your privacy zone will be activated.
With this simple step, you can easily prevent your Ring Doorbell from ringing outside.
How to Adjust the Motion Detection Range
Adjusting the motion detection range of your Ring Doorbell is a simple process that can be done using the Advanced Motion Settings.
This feature is available to customers with Ring Protect Plus subscriptions and can be found within the app.
To get started, open the Ring app, and navigate to the Device Settings page.
From there, select Advanced Motion Settings.
Once you enter the Advanced Motion Settings page, you will be presented with two options for adjusting the motion detection range.
The first option is the Motion Zones setting which allows you to draw shapes on the map of your cameras field of view to define areas you want to monitor.
The second option is the Motion Sensitivity setting which allows you to adjust the sensitivity of your motion detection.
You can use the slider to adjust the sensitivity from Low to High depending on your needs.
After youve adjusted the settings to your liking, you can save your changes and your Ring Doorbell will no longer detect motion outside the areas you have specified.
This will ensure that your Ring Doorbell will only ring when someone enters an area you want monitored.
Additionally, you can always come back to the Advanced Motion Settings page and make changes to further customize your motion detection settings.
Tips to Help Reduce False Alarms
When it comes to preventing false alarms, the first thing you should do is reduce the motion sensitivity of your Ring Doorbell.
This can be done easily within the settings in the Ring app.
Lowering the sensitivity will reduce the chance of false alarms due to minor disturbances such as leaves or animals passing by.
You can also create a privacy zone within the app which will allow you to specify which areas you don’t want monitored.
This will help reduce the chances of false alarms from motion detected in these areas.
Finally, you can adjust the motion detection range of your Ring Doorbell by using the Advanced Motion Settings.
This will give you more control over which areas are monitored and which are not.
This can help you to further reduce the chance of false alarms.
It’s important to remember that reducing the motion sensitivity of your Ring Doorbell will likely also reduce the effectiveness of the device.
You will need to find a balance between reducing false alarms and maintaining an adequate level of security.
What to Do If the Above Solutions Dont Work
If the above solutions dont work for you, there are still a few other options that you can try.
First, you can install a motion-activated light to deter unwanted visitors from approaching your front door.
This will cause the motion sensor to be triggered when it senses movement, and it will turn on the light, which will usually scare away intruders.
Another possible solution is to install a motion-activated camera above your doorbell.
This will give you the ability to monitor any motion outside your door without the need for your doorbell to be triggered.
You can then view the footage from the camera in the Ring app or on the web.
Finally, if you have access to wiring, you can install a motion-activated switch that will turn off your doorbell when motion is detected.
This will ensure that your doorbell will not be triggered by any unwanted visitors.
By using any of these solutions, you can easily and effectively stop your Ring Doorbell from ringing outside.
Pros and Cons of Having a Ring Doorbell
Having a Ring Doorbell can offer a variety of benefits, but there are some potential drawbacks as well.
For one, the device can be a nuisance if you don’t want it to alert you to motion detected outside your home.
Fortunately, there are several simple solutions you can try to stop it from ringing when motion is detected outside.
The biggest benefit of having a Ring Doorbell is added security.
Not only does it allow you to see who is at your door before you answer it, but it also acts as an effective deterrent for burglars and other criminals.
With this device, you can easily keep an eye on your property and be alerted when someone approaches.
Another benefit of a Ring Doorbell is that it can be connected to a variety of other smart home devices.
This allows you to easily integrate it into your existing home security system for added convenience and peace of mind.
However, there are a few potential drawbacks to consider as well.
The most obvious is the cost.
Although the upfront cost of a Ring Doorbell can be expensive, it can save you money in the long run by preventing break-ins and other potential problems.
Another potential drawback is that the device can be set off by motion detected outside.
This can be a nuisance if you don’t want to be alerted every time someone walks by your house.
Fortunately, there are several simple solutions you can try to stop it from ringing when motion is detected outside.
You can reduce the motion sensitivity of your doorbell by going into the settings in the Ring app, apply a privacy zone within the app to specify which areas you don’t want monitored, or adjust the motion detection range of your doorbell by using the Advanced Motion Settings.
Final Thoughts
Having a Ring Doorbell can be a great way to stay aware of what’s happening outside your home.
However, sometimes it can be annoying when it rings outside due to false alarms.
Fortunately, there are several solutions you can try to stop your Ring Doorbell from ringing outside.
From reducing motion sensitivity to applying a privacy zone, you now know how to keep your Ring Doorbell from ringing outside.
Remember, if these solutions don’t work, you can always adjust the motion detection range or take other steps to reduce false alarms.
Now that you know how to stop your Ring Doorbell from ringing outside, you can enjoy the benefits of having one without any of the annoying false alarms!