Are you experiencing problems with your Arlo Pro 2 not recording? If so, this article is for you.
Here, we’ll provide the answers you need to troubleshoot this issue.
We’ll begin by discussing the symptoms of Arlo Pro 2 not recording, then move on to potential causes such as insufficient power, incorrect settings, and a faulty device.
Finally, we’ll cover troubleshooting strategies including checking the power source and adjusting settings.
Read on to learn more and get your security camera system up and running again.
Table of Contents
Short Answer
Arlo Pro 2 may not be recording for a few reasons.
It could be because the motion detection settings are not enabled, or the camera is not receiving power.
Additionally, the camera may not be connected to a WiFi network, or the Arlo servers may be down.
If none of these seem to be the issue, contact Arlo’s customer service for assistance.
Symptoms of Arlo Pro 2 Not Recording
When the Arlo Pro 2 stops recording, it can be difficult to pinpoint the cause of the issue.
However, there are a few common symptoms that can help you identify the issue.
One of the most common symptoms is that the device will not detect motion, even when it is set up correctly.
This can be because the motion detection sensitivity is too low, or because the device has insufficient power.
Another symptom is that the recorded video appears to be cut off prematurely, indicating that the device has insufficient power or is not detecting motion correctly.
Finally, if the device is faulty, it may record video but at an extremely low quality.
It is important to be aware of these symptoms so you can troubleshoot the issue and find the root cause of the problem.
If the power source is insufficient, such as a weak Wi-Fi connection, the Arlo Pro 2 may not have enough power to record.
Similarly, if the settings are incorrect, the device may not detect motion or record correctly.
Finally, the device itself may be faulty, in which case it will need to be replaced.
Once the root cause has been identified, you can take the necessary steps to fix the issue and get the Arlo Pro 2 recording again.
Insufficient Power
When it comes to why the Arlo Pro 2 is not recording, one of the first things to consider is the power source.
If the Arlo Pro 2 is not receiving enough power, it may not have enough to record.
This could be due to a weak Wi-Fi connection, or an insufficient amount of electricity being supplied to the device.
It is important to check the power source and make sure that it is adequate for the type of security system you are using.
If you believe that the power source is not the issue, then you should check the settings of the Arlo Pro 2.
If the motion-detection settings are not configured correctly, then the device may not detect motion or record correctly.
This could be due to incorrect sensitivity levels, incorrect motion zones, or incorrect motion schedules.
It is important to check the settings and make sure they are properly configured for the environment you are using the Arlo Pro 2 in.
Finally, if the power source and settings are not the issue, then it is possible that the Arlo Pro 2 device itself is faulty.
In this case, the device will need to be replaced.
It is important to troubleshoot any potential issues to ensure the Arlo Pro 2 is working properly.
Incorrect Settings
When it comes to home security, having the right settings on your Arlo Pro 2 is essential to ensure it is recording correctly.
There are a few key settings that can cause issues with the Arlo Pro 2 not recording.
First, make sure the motion detection sensitivity is set to the correct level.
Too high of a sensitivity level can cause the device to record false positives.
Also, check that the motion zones are set up correctly so that motion in the desired area is detected.
Additionally, ensure that the video quality is set to the desired level.
A higher video quality will require more power and data, so make sure the Wi-Fi connection is strong enough to support it.
Finally, make sure the recording mode is set to the desired mode such as continuous or triggered recording.
If any of these settings are incorrect, the Arlo Pro 2 may not record properly.
Faulty Device
When it comes to troubleshooting why the Arlo Pro 2 is not recording, it is important to consider if the device itself is faulty or not.
If the device is faulty, then it will need to be replaced.
There are a few ways to tell if the device itself is faulty.
First, check to see if there are any signs of physical damage to the device, such as cracks, scratches, or dents.
If there are, then the Arlo Pro 2 may need to be replaced.
Second, check to see if the device is receiving power.
If the device is not receiving power, then it may need to be replaced.
Finally, check to see if the device is connected to the internet.
If the device is not connected to the internet, then it may need to be replaced as well.
If all of these checks have been completed and the device is still not recording, then it is likely that the device itself is faulty and needs to be replaced.
Troubleshooting Strategies
Troubleshooting an issue with the Arlo Pro 2 not recording can be a tricky process, but there are a few strategies that can help you identify and resolve the issue.
First, you should check the power source.
If the Arlo Pro 2 is not receiving enough power, then it wont have the capability to record.
Make sure that the device is connected to a reliable power source, such as a wall outlet or a surge protector.
If needed, you can also check the Wi-Fi connection to ensure that it is strong enough for the Arlo Pro 2 to record.
Next, you should check the settings.
The Arlo Pro 2 is capable of detecting motion, but it may not be configured correctly.
To check the settings, you can log into the Arlo app and select Devices to view the settings.
Here you can adjust the sensitivity of the motion detection, as well as enable or disable certain features.
Finally, if the issue persists, then it may be a sign of a faulty device.
In this case, you will need to replace the Arlo Pro 2.
You can contact Arlo support for assistance with this process.
Troubleshooting issues with the Arlo Pro 2 is not always easy, but by following these strategies, you can identify and resolve any issues you are having with the device.
Checking Power Source
When it comes to troubleshooting why your Arlo Pro 2 isnt recording, checking the power source should be the first step.
The Arlo Pro 2 is powered by either a wall outlet or a USB charger, and it needs a strong power source to be able to record.
If the power source is weak, such as a weak Wi-Fi connection, the Arlo Pro 2 may not have enough juice to record.
To ensure it is receiving enough power, try plugging the device into a different outlet or using a different charger.
It is also a good idea to check that all of the cables are securely connected and that the power source is working properly.
If the power source is found to be the problem, you may need to purchase an additional USB charger or wall outlet to power the Arlo Pro 2.
Adjusting Settings
Adjusting the settings on the Arlo Pro 2 is a crucial step in ensuring that it is recording properly.
It is important to check that the settings are correct, so that the motion-detection feature can detect motion and record it.
To adjust the settings, users should first log into their Arlo account.
From there, they can access the settings page, where they can adjust the sensitivity levels and field of view.
Depending on the environment in which the Arlo Pro 2 is located, users may need to adjust the settings further in order to ensure that the motion-detection feature is recording properly.
The sensitivity level of the motion-detection feature is an important setting to adjust as it determines how sensitive the camera is to motion.
If the sensitivity is too low, it may not detect motion, and if it is too high, it may detect motion that is not relevant to the security of the home.
It is important to adjust this setting to an appropriate level to ensure that motion is detected, but not too much motion.
The field of view is another important setting to adjust.
This setting determines the area that the camera can detect motion in.
If the field of view is too narrow, it may not detect motion in certain areas of the home.
It is important to adjust this setting to an appropriate level, so that the motion-detection feature can detect motion in the desired area.
It is also important to check the settings for any other features that may affect the motion-detection feature.
For example, the auto-mode setting can be used to enable or disable the motion-detection feature when the camera is not in use.
Adjusting these settings can help ensure that the motion-detection feature is recording properly.
Finally, it is important to check the settings for any other features that may affect the motion-detection feature.
For example, the Record on Motion setting can be used to enable or disable the motion-detection feature when motion is detected.
Adjusting these settings can help ensure that the motion-detection feature is recording properly.
By adjusting the settings of the Arlo Pro 2, users can ensure that the motion-detection feature is recording properly.
It is important to check the settings for any features that may affect the motion-detection feature, and to adjust them to an appropriate level.
Doing so can help ensure that the Arlo Pro 2 is recording properly, and that users are getting the most out of their home security system.
Final Thoughts
It’s important to understand the potential causes of Arlo Pro 2 not recording, as well as the steps you can take to troubleshoot the issue.
Whether it’s due to insufficient power, incorrect settings, or a faulty device, it’s important to check the power source, adjust the settings, and replace the device if necessary.
With the right approach and a bit of patience, you can ensure your Arlo Pro 2 is working properly and recording any and all motion detected.