Do you want to know how to get your home comfortable and energy efficient? Installing an Ecobee thermostat is an easy way to accomplish that goal.
This DIY guide will walk you through the steps of setting up an Ecobee thermostat, from preparation to app setup.
You’ll learn how to turn off the power to the furnace, connect the wiring, mount the Ecobee on the wall, and more.
By the end of this guide, you’ll be well on your way to a comfortable and energy-efficient home.
Table of Contents
Short Answer
To install an ecobee thermostat, first turn off the power to your HVAC system at the breaker.
Then, remove the cover of the existing thermostat and unscrew the base from the wall.
Disconnect the wires from the base and then connect them to the corresponding terminals on the ecobee thermostat.
Finally, mount the base on the wall, replace the cover, and turn the power back on.
Preparation for Installing an Ecobee Thermostat
Before beginning the installation of an ecobee thermostat, it is important to properly prepare.
First, it is essential to turn off the power to the furnace at the circuit breaker.
Depending on the model, this might be a breaker in the panel or a switch on the side of the furnace.
It is also important to have the necessary tools on hand for the installation process.
This includes a Phillips head screwdriver, a wire cutter, and a wire stripper.
Additionally, some models may require a drill.
Next, it is important to remove the existing thermostat and disconnect the wiring.
Depending on the model, the wiring may need to be disconnected by twisting the wires or by squeezing the ends of the wires together.
It is important to take note of the wire colors and how they are connected to the existing thermostat.
This will help ensure the new thermostat is installed correctly.
Once the existing thermostat is disconnected, it is time to connect the new wiring to the ecobee thermostat.
The wiring should be connected to the appropriate terminals, with the colors matching the corresponding terminals.
This should be done carefully and correctly to ensure the thermostat operates properly.
After the wiring is connected, it is time to mount the thermostat on the wall.
The mounting bracket should be placed on the wall in the desired location, and the thermostat should be securely fastened to the bracket.
Once the thermostat is installed, it is time to turn the power back on and set up the ecobee.
This can be done using the ecobee app, which will provide step-by-step instructions on how to set up the thermostat.
With the ecobee, you will be able to control the temperature of your home from anywhere.
Turning Off the Power to the Furnace
When it comes to installing an ecobee thermostat, the first step is to turn off the power to the furnace at the circuit breaker.
This is an important step in the installation process and should not be overlooked.
To do this, you will need to locate the circuit breaker in your home and switch it off.
It is recommended that you use a voltage tester to confirm that the power is off before beginning the installation.
Once you have verified that the power is off, you can move on to the next step.
It is important to note that when you turn off the power to the furnace at the circuit breaker, the furnace may not power back up when you switch the circuit breaker back on.
You may need to reset the furnace by pressing the reset button located on the furnace.
This will ensure that the furnace is working properly before you start the installation process.
Additionally, if you have any questions about turning off the power to the furnace, you should consult your local HVAC professional for assistance.
Removing the Existing Thermostat
Removing the existing thermostat is a crucial step in installing a new ecobee thermostat.
Before getting started, you should turn off the power to the furnace at the circuit breaker.
This will ensure that you dont get shocked while removing the thermostat.
Once the power is off, you can begin to remove the existing thermostat.
Start by taking off the cover from the old thermostat.
This will expose the wiring and screws that hold the thermostat in place.
Use a screwdriver to unscrew the screws and lift the thermostat off of the wall.
Once youve removed the thermostat, disconnect the wiring from the back of the device.
Be sure to take note of the wire colors and their corresponding terminals on the back of the thermostat.
This will make it easier to connect the new wiring to the ecobee.
After the wiring is disconnected, you can dispose of the old thermostat.
You can now move on to the next step of installing the new ecobee thermostat.
Connecting the New Wiring to the Ecobee
Connecting the new wiring to the ecobee thermostat is the next step in the installation process.
Before you start, make sure the power is turned off at the circuit breaker.
Once youve done that, its time to start connecting the wires.
First, identify the wires in the existing thermostat and disconnect the wiring.
Youll want to label each wire so you know exactly which one goes where.
This will make it easier to connect the new thermostat.
Once youve disconnected the wires, you can begin connecting them to the ecobee.
You will need to match up the wires to the corresponding terminals on the ecobee.
You can find the labels for the terminals on the ecobee itself or in the user manual.
Take your time to make sure all the wires are connected to the correct terminals.
Once youve connected all the wires, its time to mount the ecobee to the wall.
Before you do this, make sure the wires are securely connected and the terminals are properly sealed to prevent any air leaks.
Then, use the included mounting hardware to attach the ecobee to the wall.
After the ecobee is installed, you can turn the power back on and follow the instructions on the ecobee app to set up the thermostat.
With the ecobee, you can control the temperature of your home from anywhere.
Installing an ecobee thermostat is a great way to take control of your homes temperature.
By following these steps, you can easily install your ecobee and start enjoying the convenience of a smart thermostat.
Mounting the Ecobee on the Wall
Mounting your Ecobee thermostat is a simple and important step in the installation process.
First, you’ll want to make sure that you have the right tools and materials, such as a drill and mounting hardware.
If you need a particular type of mounting hardware that is not included with the thermostat, contact the manufacturer for specific instructions.
Once you have the necessary materials, you can begin mounting the Ecobee.
Start by removing the existing thermostat from the wall and disconnecting the wiring.
Then, use a level to make sure the mounting plate is level before you begin drilling the holes.
Next, attach the mounting plate to the wall with the appropriate screws.
Once the mounting plate is in place, you can attach the Ecobee to the plate.
Make sure that the wiring is connected properly and all screws are tight.
Finally, turn on the power to the furnace at the circuit breaker and follow the instructions on the Ecobee app to set up the thermostat.
With the Ecobee, you can now control the temperature of your home from anywhere.
This is a great way to save energy and money, while still having complete control of your home’s environment.
Turning the Power Back On
After the wiring has been connected and the ecobee thermostat is mounted on the wall, it’s time to turn the power back on.
To do this, switch the circuit breaker back on or reattach the fuse.
Once the power is back on, you’ll need to follow the instructions on the ecobee app to complete the installation.
Depending on the model of the thermostat, the app may prompt you to scan a QR code or enter a code provided with the unit.
When setting up the thermostat, you’ll be asked to enter information such as the type of heating and cooling system you have, as well as the size of your home.
Once the basic information is entered, you’ll be able to adjust the settings and preferences to personalize the thermostat to your home.
You can choose the temperature range, schedule, and other features.
Once the setup is complete, you’ll be able to control the temperature of your home from anywhere.
You can adjust the temperature from your phone or tablet, or you can use voice commands if you have a compatible device.
With the ecobee thermostat, you can save energy and money, and enjoy a more comfortable home.
Setting Up the Thermostat on the Ecobee App
Once you have successfully installed your ecobee thermostat, you will need to set up the thermostat on the accompanying ecobee app.
This is the final step in the installation process and is relatively straight-forward.
To begin the setup process, you will need to download the ecobee app on your smartphone or tablet.
The app is available for both iOS and Android devices.
Once the app is installed, you can easily sign in with your ecobee account.
Once you have logged into the app, you will be prompted to sign in to your ecobee thermostat.
To do this, you will need to enter the serial number found on the back of the thermostat.
Once successfully connected, you will be able to access all of the features available in the ecobee app.
The app will give you the ability to adjust the temperature of your home remotely.
You can also set up schedules, change the fan settings, and adjust the humidity levels in your home.
Additionally, the app will allow you to set up notifications to alert you when the temperature changes or if the thermostat needs maintenance.
The ecobee app is an incredibly useful tool for controlling your home’s temperature.
The easy-to-use interface and comprehensive features make it a great choice for anyone looking to make their home more energy-efficient.
With the ecobee, you can take control of your home’s temperature and save money on your energy bills.
Final Thoughts
Installing an ecobee thermostat is a great way to gain control over your home’s temperature.
With this DIY guide, you now know how to turn off the power to the furnace, remove the existing thermostat, connect the new wiring, mount the ecobee, turn the power back on, and set up the thermostat.
Now that you have all the information you need, why not take the plunge and install your own ecobee thermostat today?