Are you ready to upgrade your home security with a Ring Video Doorbell Pro? Installing a Ring Video Doorbell Pro may seem intimidating, but with a few simple steps, you can get your new doorbell up and running in no time.
In this article, well walk you through the necessary steps to remove your existing doorbell, install the mounting bracket for the Ring Video Doorbell Pro, connect the wires, and turn the power back on.
So lets get started!
Table of Contents
Short Answer
Remove the Ring Video Doorbell Pro by pressing the button on the back of the doorbell to release it from its mounting bracket.
Then, disconnect the wires from the back of the doorbell.
Finally, unscrew the mounting screws and lift the doorbell away from the wall.
You may need to use a flathead screwdriver to help with the removal process.
Preparing to Remove the Existing Doorbell
Removing your Ring Video Doorbell Pro doesnt have to be a difficult process.
Before you begin, however, youll need to make sure you have the necessary tools and materials.
First, youll need to have a screwdriver and a pair of pliers.
Youll also need to make sure you have the included screws and mounting bracket for your Ring Video Doorbell Pro.
Once you have these materials handy, you can begin the process of removing your existing doorbell.
First, turn off all power to the existing doorbell.
This is a crucial step to ensure safety and prevent any damage to your home.
Once the power is off, you can then disconnect the wires from the transformer in order to start the removal process.
Next, youll need to unscrew the existing doorbell from its mounting bracket.
This can be done by using a screwdriver to loosen the screws holding the doorbell in place.
Once the screws are unscrewed, the doorbell should be free from its mounting bracket.
At this point, you can remove the existing doorbell from your home.
Turning Off Power to the Doorbell
When it comes to removing your Ring Video Doorbell Pro, the first step is to turn off all power to the existing doorbell.
This is typically done through the circuit breaker in the main fuse box, but you may need to turn off the power at the existing doorbell itself.
It is important to ensure that all power is completely off before you begin working on the doorbell, as this will prevent any potential damage or injury.
Once the power is off, you can safely begin the process of removing your existing doorbell.
Be sure that you’re wearing protective gloves to guard against any accidental contact with the wiring, as the electricity is still live even after the power has been turned off.
Removing the Existing Doorbell
Removing your existing doorbell before you can install your Ring Video Doorbell Pro is an important step that must not be overlooked.
To begin, be sure to turn off all power to the existing doorbell.
Once the power is off, you can remove the wires from the transformer and unscrew the existing doorbell from its mounting bracket.
This process can be a bit tricky, as the wires may have been connected with some type of adhesive or locking mechanism, so take your time and make sure you have the right tools for the job.
Once the old doorbell has been removed, youll need to install the mounting bracket for your Ring Video Doorbell Pro.
This is a simple process that requires only a few basic tools.
Youll need to attach the mounting bracket to your door frame with the included screws, and then attach the Ring Video Doorbell Pro to the bracket.
Be sure to follow the included instructions carefully, as incorrect installation can affect the performance of your Ring Video Doorbell Pro.
Once the mounting bracket is installed, you can now connect the wires to the transformer, and then use the included screws to secure the doorbell to the bracket.
Once the Ring Video Doorbell Pro is connected to the power source, you can turn the power back on.
Finally, your Ring Video Doorbell Pro is now ready to use.
Installing the Mounting Bracket for the Ring Video Doorbell Pro
Installing the mounting bracket for the Ring Video Doorbell Pro is an important step in the removal process.
This will help ensure that the new doorbell is securely in place and will remain so for years to come.
The first step in this process is to locate the existing mounting bracket.
This can usually be found on the outside wall of the home near the doorbell.
Once the mounting bracket has been located, it must be disconnected from the existing doorbell.
This can typically be done with a screwdriver or other small tool.
Once the existing bracket has been disconnected, the Ring Video Doorbell Pro mounting bracket can be installed in its place.
The included screws should be used to secure the bracket to the wall.
It is important to make sure that the screws are placed in the correct locations and are screwed in tight.
Additionally, the included mounting hardware should also be used to ensure that the new doorbell is securely in place.
Once the mounting bracket is properly secured to the wall, the wires can then be reconnected to the existing transformer.
Once all of the necessary steps have been taken, the power can then be turned back on and the Ring Video Doorbell Pro will be ready for use.
With the proper installation and maintenance, Ring Video Doorbell Pro is an ideal choice for doorbells that offer a level of security and convenience to homeowners.
Connecting Wires to the Transformer
When it comes to connecting your Ring Video Doorbell Pro, the first step is to connect the wires to the transformer.
First, locate the transformer near the chime box or the circuit breaker panel.
The transformer will be connected to the existing doorbell wiring.
Unscrew the existing doorbell from its mounting bracket and remove it.
Once the old doorbell has been removed, its time to connect the wires to the transformer.
Connect the wires to the transformer using the included screws.
Make sure the wires are securely connected and that nothing else is touching the transformer.
Once the wires are connected, they should be secured in place using electrical tape.
Its important to make sure the connection is secure and that the wiring is not loose.
If the wiring is loose, it can cause a short circuit and your Ring Video Doorbell Pro will not work.
Once the wiring is securely in place, you can turn the power back on and your Ring Video Doorbell Pro is now ready to use.
Securing the Ring Video Doorbell Pro to the Mounting Bracket
Once the old doorbell has been removed, it’s time to install the mounting bracket for the Ring Video Doorbell Pro.
This mounting bracket is necessary for the safety and security of the device, as it ensures that the device is securely fastened to the wall.
To begin, use the included screws to attach the mounting bracket to the wall.
Make sure that the holes in the bracket align with the holes in the wall to ensure a secure fit.
Next, connect the wires to the transformer.
The Ring Video Doorbell Pro includes an adapter that allows you to connect the wires to the transformer.
This adapter allows you to connect the two wires from the existing doorbell wiring to the transformer.
Make sure that the wires are securely connected before moving on to the next step.
Finally, use the included screws to secure the doorbell to the mounting bracket.
Be sure to use the screws provided, as using any other type of screws may damage the device.
Once the screws are in place, your Ring Video Doorbell Pro is securely fastened to the wall and ready to use.
With that, you have successfully installed your Ring Video Doorbell Pro.
All that’s left to do is to turn the power back on and you can start using your new device.
Turning the Power Back On
Turning the power back on to your Ring Video Doorbell Pro is the last step in the installation process.
After you have connected the wires to the transformer and secured the doorbell to the bracket, it is time to turn the power back on.
Before you turn the power back on, it is important to make sure that all connections are secure and that the wires are not exposed or frayed.
It is also important to test the doorbell to ensure that it is functioning properly.
To do this, simply press the test button on the doorbell.
This will activate the doorbell and emit a chime.
If the chime is heard, then the doorbell is ready to use.
Once the doorbell has been tested and all connections are secure, you can turn the power back on.
Depending on your homes power source, you may have to flip a switch on the electrical panel or on the wall outlet.
Once the power has been turned on, the Ring Video Doorbell Pro will be fully functional and ready to use.
It is important to remember that the Ring Video Doorbell Pro requires a significant amount of power to operate.
If you are having difficulty getting the doorbell to work, make sure that the power source is providing enough power.
If the power source is not providing enough power, you can purchase a power adapter from Rings website.
By following these simple steps, you can easily turn the power back on to your Ring Video Doorbell Pro and start using it right away.
It is important to take the time to make sure all connections are secure and that the power source is providing enough power for the doorbell to function properly.
Once the power is turned on, the Ring Video Doorbell Pro will be ready to use.
Final Thoughts
Removing and installing a Ring Video Doorbell Pro is a simple process that can be completed with basic tools and an understanding of the steps outlined above.
Now that you know the steps, why not give it a try yourself? With the Ring Video Doorbell Pro securely installed, you can now rest assured that your home is protected with the latest in video doorbell technology.